130bar High Pressure Washer

Product Description

The Electric High-Pressure Washer is generally used for roof cleaning. The unit comes standard with single phase220-voltmotor and delivers 10 liters per minute at 130 bar. The sturdy, rollover frame is ideal for positioning on scaffolding or roofs. The trigger operated 900mm lance can be fitted with various nozzles but is most often used with a Roto Jet rotary nozzle, which doubles the effective cleaning rate. It is ideally suited for a variety of domestic or industrial applications. A chemical injector post pump also allows for the introduction of chemical agents in the cleaning process if required. High pressure hose extensions are available for hire for extra reachability.

Product Specifications 

• Voltage Supply: 220V
• Pressure: 130 bar
• Water Flow: 10 l/min

Accessories 

• Gardena 20mm/Geka 3/4"Fitting

Equipment normally on hire with this product

• 20mExtension Lead
• Hose Pipe 15m long with Gardena couplers (20id/25od)
• High Pressure Hose Extension

Operating Instructions

• Before use, check power cord, extension lead, hoses, sockets and power outlet for damage.DO NOT OPERATE IF ANY FAULTS FOUND.
• Ensure no other persons are in the immediate work area.
• Only use pressure washer when handheld and never leave washer when it’s running.
• Ensure electrical lead and hose movement is not impeded while working.
• DO NOT OPERATE WASHER UNTIL WATER SUPPLY IS ATTACHED AND RUNNING.
• DO NOT POINT HOSE AT ANY PERSON INCLUDING THE OPERATOR.
• DO NOT LOCK TRIGGERIN THE ‘ON’ POSITION.
• Cleaned surface may be damaged if nozzle is too close to that surface.
• Monitor work area to ensure no person is able to be injured by dislodged material. IF ANY PERSON ENCROACHES INTO WORK AREA, IMMEDIATELY RELEASE TRIGGER AND STOPWORK.
• Continually check that electrical lead is not lying in water.
• When finished, release trigger and place nozzle on ground pointing away from machine and people.
• Turn cleaner off at the machine.
• Turn off water supply and disconnect from tap.
• Coil power lead and hose and position to one side.
• Store unit in an appropriate location.

Safety Warnings:

• The instructions recommended within this document apply to normal risk conditions. If the Pressure Washer is to be operated in a dangerous or hostile environment, the user/client is responsible for conducting an appropriate risk analysis and applying suitable controls to mitigate those additional risks. This instruction should be read in conjunction with the Risk Assessment.
• Safety glasses, gloves, safety footwear and Hi-Vis Jacket must be worn at all times.
• Close fitting protection clothing must be worn.
• Hearing protection must be considered when using this machine.

Safety Equipment suggested:

Eye Protection
All round protection: grade 1 goggles
Less hazardous work: grade 2 spectacles

Breathing Masks
General purpose, disposable masks for low-risk dust and water-based airborne sprays.

Ear Defenders
Protection against high noise levels. Earplugs are suitable for short-term work.

Safety Footwear
Wear safety footwear for toe protection.

Protective Gloves 
Gauntlets, PVC, cotton or rigger gloves for hand protection.