Flood Lights

The Flood Light on Tripod Stand is an ideal lighting solution for larger working environments. These powerful fully enclosed floodlights can be adjusted to suit your required working height.

Operating Instructions

• Position lights with care – somewhere they won’t easily be knocked over and where they won’t Dazzle drivers, this can be as dangerous as darkness.
• Where applicable, splay out and level tripod legs.
• Uncoil the light’s lead, point the lamp in the required direction and raise the mast to the required height.
• Just loosen the appropriate thumbscrews, then re-tighten them to secure the lamp when satisfied.
• Coil excess lead neatly but loosely, close to the power supply and away from the work area where people can’t trip over it.
• All that now remains is to plug the light into its power supply, switch ON and check that it works as it should.
• Having switched OFF and unplugged the light, wait for it to cool before packing, ready for return.
• Fold up any tripod or mast.
• Finally, neatly coil the flex ready for return to your local BuildEquip Hire Shop.

General Safety

• Always switch OFF and unplug the equipment before making any alterations or adjustments to it.
• Always handle halogen bulbs with a clean cloth or similar.
• Grease from your skin could create a ‘hot spot’ in use, causing the bulb to explode.
• Changing Bulbs - Switch OFF and unplug the floodlight from it’s power supply. Open the floodlight’s casing and remove the old bulb. Carefully unpack the new bulb, taking care not to touch it with your skin – hold it using the packaging or something similar. Finally, just clip the bulb into place, making sure it is properly seated, and securely close the floodlight’s casing.
• When not in use, store the equipment somewhere clean, dry and safe from thieves.