Vehicle Ramp Stand

Product Description

A vehicle ramp is a structure or device used to:

• Raise an automobile from the ground to access its undercarriage.
• Lift a vehicle from the ground without the need for a hoist.
• Provide more ground clearance for maintenance tasks.

Product Specifications

• Load Rating: 1000kg load rating per ramp
• Weight:25kg per pair
• Ramp Height:230mm
• Ramp Length:1120mm

Safety

WARNING! DO NOT OVERLOADRAMPS BEYOND RATED CAPACITY. OVERLOADING CAN CAUSE DAMAGE TO, ORFAILURE OF, THERAMPS. POSITION LOAD ON CENTRE OFTHE RAMP. ALWAYS USERAMPSIN PAIRS ON HARD LEVELSURFACE CAPABLE OF SUSTAINING THE LOAD. USE OFRAMPSON OTHER THAN HARD LEVEL SURFACES CANRESULT IN LOAD INSTABILITY AND POSSIBLE LOSS OF LOAD. DO NOT USE ON TARMACADAM. FAILURE TO FOLLOWTHESE INSTRUCTIONS MAY RESULT IN DAMAGE TORAMPS, LOSS OF LOAD RESULTING IN PROPERTY DAMAGE,SERIOUS PERSONAL INJURY OR LOSS OF LIFE.

• Ensure the load does not exceed the maximum capacity, per pair.
• Use no more than a single pair of ramps either on the front, rear or one side of the vehicle.
• Always use in pairs.
• No alterations or modifications shall be made to this product.
• Use on a hard, level surface, e.g. concrete. Do not use on uneven ground or tarmacadam.
• Securely chock wheels in contact with the ground. When placing the ramps, apply vehicle handbrake (put automatics in ‘Park’).
• Exercise extra care when using with a three wheeled vehicle or a trailer. Refer to vehicle manufacturer's instructions.
• Once vehicle is supported, ensure that the vehicle and ramps are stable before starting work. Ensure that it is not possible for the vehicle to move before commencing any work.
• Inspect ramps before each use. DO NOT use if they show signs of damage. DO NOT use if it is suspected that they have been overloaded.
• Before commencing any work or going beneath the vehicle, undertake a risk assessment. Ensure that a responsible person is aware of the work about to be undertaken.
• DO NOT use axle ramps on the highway, or anywhere else if it is deemed to be unsafe.
• DO NOT push or twist the vehicle/load whilst it is supported on stands.
• DO NOT mix components between ramps. Use only as supplied.
• DO NOT allow children or animals in the vicinity of a vehicle supported onramps
• DO NOT leave a vehicle on ramps in an area that could be considered a hazard to others or property

Safety Equipment Suggested:

 Safety Footwear
Wear safety footwear for toe protection.

 Protective Gloves
Gauntlets, PVC, cotton or rigger gloves for hand protection.